U15XXL and 62"Prop from T-motor

/*
This script is designed to upload thrust data 
by following a user-specified test sequence. 
You should design the test sequence to cover as much as
possible in terms of the motor and propeller rotations
speeds.
*/

////////// Script parameters /////////

var throttlePoints = [
  [1050, 1075, 1100, 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500, 1525, 1550, 1575, 1600],
]; // List of test points

var escStart = 1000; // ESC idle value

var escInitTime = 4; // Hold time at ESC idle

var settlingTime_s = 3; // Settling time before measurement
    
var cooldownTime_s = 0; // If the motor needs to cool down between steps
    
var cooldownThrottle_us = 1000; // Cool down faster when slowly spinning
    
var max_slew_rate_us_per_s = 100; // Limits torque from throttle changes, but adds extra test time

var samplesAvg = 25; // Number of samples to average

var save_CSV_file = false; // Save data to CSV file

//////// Beginning of the script /////////

var output = "esc";

var firstRowAdded = false;
var stepState = 0;
var lastThrottle = escStart;

// Begin the sequence
initESC(function(){
  tare(function(){
    takeSample(step);
  });
});

// validate the throttle points
throttlePoints[0].forEach(function(el){
  if(isNaN(el) || !Number.isInteger(el)){
    rcb.console.error("Error: throttle points should be integers. Given: " + el);
  }
  if(el < 700 || el > 2300){
    rcb.console.error("Error: throttle points should be between 700 and 2300 µs.");
  }
});

//Starting a new CSV log file
if(save_CSV_file){
  rcb.files.newLogFile({prefix: 'U15XXL_62-Prop_T-motor'});
}

//Tare the load cells and the current sensor
function tare(callback){
  rcb.sensors.tareLoadCells(function(){
    //taring current has an effect only in the Series 1780
    rcb.sensors.tareCurrent(callback);
  });
}

//Arms the ESC
function initESC(callback){
    //ESC initialization
    rcb.console.print("Initializing ESC...");
    rcb.database.log("ESC init value (µs): " + escStart);
    rcb.output.set(output, escStart);
    rcb.wait(callback, escInitTime);
}

//Performs steps, until no more.
function step(){
  switch(stepState) {
      
    // ramp up to next data point
    case 0: 
      if(throttlePoints[0].length > 0){
        var nextPoint = throttlePoints[0].shift();
        rcb.console.print("Testing at : " + nextPoint);
        var rampUpTime_s = calcRampTime(lastThrottle, nextPoint);
        rcb.output.ramp(output, lastThrottle, nextPoint, rampUpTime_s, step);
        lastThrottle = nextPoint;
        stepState++;
      }else{
        endFct(); // no more points to test, finish the script
      }
      break;
      
    // stabilization time then take a measurement.
    case 1: 
      rcb.wait(function(){
        takeSample(step);
      }, settlingTime_s);
      
      // next step will depend on if there is cooldown time specified
      if(cooldownTime_s > 0){
        stepState++;
      }else{
        stepState = 0;
      }
      break;
        
    // ramp down to specified cooling throttle
    case 2: 
      var coolDownThrottle = cooldownThrottle_us;
      var rampDownTime_s = calcRampTime(lastThrottle, coolDownThrottle);
      rcb.output.ramp(output, lastThrottle, coolDownThrottle, rampDownTime_s, step);
      lastThrottle = coolDownThrottle;
      stepState++;
      break;
                      
    // wait for cooldown time, then go to the next step
    case 3: 
      rcb.console.print("Cooling down...");                
      rcb.wait(step, cooldownTime_s);
      stepState = 0;
      break;
  }
}
  
// calculates the time needed to perform a ramp from and to
// without exceeding the max slew rate parameter.
function calcRampTime(from, to){
  if(max_slew_rate_us_per_s > 0){
    rcb.console.print("Ramping...");
    return math.abs(from-to) / max_slew_rate_us_per_s;
  }
  return 0;
}
  
//Calculates the rpm value depending on if using the optical or electrical probe
function getRPM(result){
  var rpm = result.motorOpticalSpeed.workingValue;
  if(result.motorElectricalSpeed){
    rpm = math.max(result.motorElectricalSpeed.workingValue, rpm);
  }
  return rpm;
}
  
// Records a sample to database
function takeSample(callback){
    rcb.sensors.read(function (result){
        var rpm = getRPM(result);
        if(result.thrust.workingValue < -0.05){
          rcb.console.error("At this time we only support positive thrust values. Please reverse the thrust sign from the utilities tab.");
        }
        if(result.torque && result.torque.workingValue < -0.01){
          rcb.console.error("At this time we only support positive torque values. Please reverse the torque sign from the utilities tab.");
        }
        if(result.current.workingValue < -0.1){
          rcb.console.error("At this time we only support positive current values.");
        }
        if(!firstRowAdded && rpm > 0){
          rcb.console.error("The first row of the data should be at zero rpm.");
        }
        // do not add more than one rpm=0 rows
        if(!firstRowAdded || rpm > 0){
          rcb.database.addData(result);
          firstRowAdded = true;
        } 
      
        if(save_CSV_file){
          rcb.files.newLogEntry(result, callback);
        }else{
          callback();
        }
    }, samplesAvg);
}
  
// Called at the end of the steps
function endFct(){
    // ramp down the motor back to initial throttle
    var finishThrottle = escStart;
    var rampTime_s = calcRampTime(lastThrottle, finishThrottle);
    rcb.output.ramp(output, lastThrottle, finishThrottle, rampTime_s, function(){
      // give time for the motor to reach a full stop
      rcb.wait(function(){
        rcb.database.submit(rcb.endScript);
      }, 1);
    });
}